Bungee cord cassette for single point milk crate attachment.

Discussion in '2012+ CRF250L Tech Talk' started by beatty_dt, May 9, 2019.

  1. beatty_dt

    beatty_dt New Member

    Messages:
    15
    Cassette made from red oak salvaged from a pallet. Bungee is 3/8 inch marine grade. Ends finished with recycled hog rings from an old spent commercial bungee.
    Wanted to keep intrusion into the crate to a minimum.
    The crate is as purchased without any fittings so it could be replaced easily if damaged.
    Bolts are 1/4 inch carriage with self locking nuts.
     

    Attached Files:

  2. Alex

    Alex crf250l.org dude

    Messages:
    573
    :thumbup:
     
  3. beatty_dt

    beatty_dt New Member

    Messages:
    15
    Thanks Alex. The crates hold securely. The cassette is bit fussy to make.